AXD – SMOKE AND HEAT EXHAUST FANS
Smoke and heat exhaust fans are certified according to EN 12103-3: 2015 in the categories F200, F300and F400 . Smoke and heat exhaust fans are mainly used for the removal of smoke in the event of fire breaking out, which minimizes the suffocation hazard and creates a smoke-free escape route. They can be used in an axial, centrifugal, roof and box model.
Quick Facts
Sizes 400 up to 1.600 mm
Motor IP55, class H insulation.
Efficiency IE3, 230/1/50 or 400/3/50
Capacity up to 200.000 m³/hr
Pressure up to 1.600 Pa
Control Frequency converter
Casing Galvanized Sheet Metal
Impeller Aluminum
Airflow Motor à Impeller / Impeller à Motor
Extra Motors for different voltages, frequencies and with certificates
Application
Smoke fans are used for removing heat, smoke and combustion gases generated in rooms during fire. They facilitate evacuation of people from fire zone, as well as fire fighting operations carried out by fire brigades. They also protect the building structure and its equipment from the effect of high temperature, and prevent spreading of fire to adjacent areas. The fan is intended for all types of general ventilation installations.
Typical Applications are:
General Ventilation systems of Commercial and Industrial premises, Ventilation of Storage Facilities, Ventilation of garages, public utility buildings, etc.
Operating Temperature
High Temperature Application: available up to 400°C/2Hrs.
Motor
- Motor Insulation Class H.
- Motor Protection Class IP 55.
- Motor Efficiency Class IE3.
- Motor Enclosure Type TEAO.
- Motor Brand WEG.
- Available with three phase motors in 2, 4 poles.
- Available with One and two speed motors.
- F400-120 motors are IP55, class H insulation .
- F300-120 motors are IP55, class H insulation.
- Motor of other specifications are available upon request.
