AXS Fan Axial duct fan with motor outside the airflow.
Fans are used in ventilation installations, where the fan is connected to air ducts at the inlet and outlet and the motor has to be separated from the air stream due to increased temperature or the presence of dust in transported air.
Quick Facts
Sizes 500 up to 1.000 mm
Motor motor IP55, 230/1/50 or 400/3/50 Capacity up to 48.000 m³/hr
Pressure up to 750 Pa
Control Frequency converter
Casing Steel / Aluminum / Stainless steel (size 900 only in galvanized steel)
Impeller Plastic / Aluminum
Airflow Motor à Impeller / Impeller à Motor
Temperature Higher temperature ratings up to 200°C -Isolation of motor from heat or contaminants in the airstream.
Easier maintenance
APPLICATION
AXS fans are used in ventilation installations, where the fan is connected to air ducts at the inlet and outlet. The electrical motor mounted in a special chamber is completely separated from the stream of transported air. BAXI fans are suitable for use in ventilation systems that require high temperature of transported air, ventilating hoods over furnaces.
Operating Temperature
Normal Ventilation: -20°C to +200°C.
Motor
Single-phase 230V 50Hz, three-phase 230/400V 5OHz, 400/690V 5OHz, degree of protection IP 55, insulation class F, efficiency IE3 for voltage regulation (single-phase motors), for frequency control (three-phase motors).
CONSTRUCTION
Axial fan with direct drive designed for duct mounting in the horizontal position. The housing is made of welded steel sheet covered with powder paint. The rotor is made of aluminium and dynamically balanced, according to ISO 1940-1. The fans are designed for use witihin the temperature range up to +200 C. We could supply the equipment tailored to individual customer needs, including: provided with non-standard housing (adjusted length or diameter, made of stainless or galvanized steel). The fans can be supplied in any color from the RAL palette fans with a diameter above 1000 mm individually selected to the specified working point.
