AXW-Wall- Axial wall fan with norm motor
For clean air supply or exhaust applications in factory or warehouse where large volume of air is required at low pressures are required.
Quick Facts
Sizes 200 up to 1.000 mm
Motor Motor IP55, 230/1/50 or 400/3/50 Capacity up to 55.000 m³/hr
Pressure up to 690 Pa static
Control Frequency converter
Casing Plastic / Steel coated or galvanized
Impeller Plastic / Aluminum
Airflow Motor à Impeller / Impeller à Motor
Temperature Normal Ventilation: -20°C to +55°C
Extra Motors for different voltages, frequencies and with certificates
Atex Gas : zone 1 II2G and 2 II3G Dust on request: zone 21 II2D and 22 II3D
APPLICATION
AXW fans typical uses are:
general ventilation of commercial premises and industrial halls, ventilation of warehouses and storage warehouses, ventilation of garages and public utility buildings, etc.
MOTOR
asynchronous, single-phase 230V 50Hz asynchronous, three-phase 400V 50Hz, efficiency class IE3, degree of protection IP55, insulation class F, single-phase motors driven by voltage, three-phase motors are adapted for frequency converter.
Operating Temperature
– 20degC to +60degC
Working temperature
range from -15°C to +40°C.
Finish
Zinc rich primer and polyester powder coating or galvanized finishing are available for all mild steel parts.
Propeller fan for wall or panel mounting with wall plate made of mild steel, with painted finish. Impeller having blades made of Glass Reinforced Polypropylene (PPG), Glass Reinforced Polyamide
(PAG) or Aluminum. Statically and dynamically balanced to ISO 1940 standard.
